C10 Talk

By Ronnie Wetch

Listen to a podcast, please open Podcast Republic app. Available on Google Play Store.

Category: Automotive

Open in iTunes

Open RSS feed

Open Website

Rate for this podcast


C/10 Talk is a Podcast about all things C/10 Trucks: Builders, aftermarket, and most importantly, the C/10 Community!

Episode Date
Holley Terminator and 4L80E

I recently installed a Holley Terminator (TBI) system in YelLOWstone with the help of Johny G and Jason "Big 10" Bowman. 

Holley Terminator - #550-445 (Classic Gold)





Holley Dominator Big Block intake - #300-5


GM - 4L80E

GM O/D gauge selector - 84 to 89. 


Dakota Digital  - Guages


GPS Unit


GC Cooling 


Classic Performance Products - 


Brothers Trucks - 

Tanks - 


Sending Units - 


Intake Walbro #255 fuel pumps


GM Fuel Selector 


Johny G - @66chevy

Jason Bowman - @Big10Garage

As you can see there was a lot that went into the new set up and it runs great. 

Thanks to Johny and Jason for the help. 

Mar 13, 2019
Lonestar Throwdown 2019

#127 is brought to you by these Rad Ass C10 Companies - 

www.mar-k.com - More then just moldings - so, so much more - Made in the USA. 

www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC truck parts - check out there killer DIY videos too.

www.PRP.com - Demand Precision - ask for Precision Replacement parts at your favorite C10 Retailer. 

www.classicperform.com - Save 10% by using code "C10 Talk" at check out - 10%!!

Lonestar Throwdown is one of the biggest truck/car show gatherings in the South - Every year thousands gather for an unmatched atmosphere - Fun, Friends and Rad Ass Cars and Trucks. 

Ronnie grabs a few interviews from the show and captures the true vibe of one the best shows out there. 

Thanks for tuning in and listening to C10 Talk. Please remember to SHARE, SUBSCRIBE, AND LEAVE US A REVIEW. 

Mar 06, 2019
Paul Hitch

Episode #126 is brought to you by these Awesome C10 Companies. 

www.AZProPerformance.com - When you're ready to upgrade from stock.

www.DakotaDigital.com - Have you seen the new RTX gauge - Stock look with Dakota Digital performance. Rad Gauges. 

www.classicperform.com - Use "C10 Talk" at check out to save 10% off your total bill.

www.accuair.com - The Creators of the ENDO system and the Leader in Air Management.


Paul Hitch was the Chief Engineer of Chevrolet Trucks from 1965 - 1976. Working for GM from 1935-1978. 

Paul will be 102 years old, March 2 2019 - Amazing. 

Paul shares some great knowledge with us about the trucks, the history and his career. 

His son Doug Hitch sits in on this one as well. 




Mar 01, 2019
Eric Stanczak

Episode #125 - Is brought to you by these Rad Ass C10 Companies. 

www.classicperform.com - Save 10% for using the code "C10 Talk" at check out - Damn Son, 10%!!

www.prp.com - If you want to SEAL YOUR BUILD RIGHT, seal your build with Precision Replacement Parts.

www.mar-k.com - Have you guys seen Mar-K's new Squarebody Molding? Brand New for 2019!! 

www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC restoration Parts. 

Eric Stanczak is currently the Chief Engineer of Chevrolet Full Size Trucks. This is the same position our next guest, Mr. Paul Hitch held from 1965 - 1976. 

Eric had the opportunity to meet, and interview Paul last year. I sit down with Eric and talk to him about the experience and what it meant to him. 

Thanks Eric, Ronnie

Feb 18, 2019
Wrench'd Season 2

Bonus is brought to you by @ 



I talk about Eastbound and Down 3rd year run to Lone Star Throwdown. 

I sit down and chop it up with Wrench'd Star Justin Nichols and we talk about what we can look forward to with Season 2 of Wrench'd on the MotorTrend TV. 

Premiering Feb. 6th.


Jan 31, 2019
Barrett Jackson

Episode #124  - Interviews from Barrett Jackson Live is brought to you by these rad ass C10 Sponsors - Please support those that support us. 


When you need to upgrade those old gauges - Dakota Digital.


Upgrade from stock - thing Pro Performance!


Save 10% - Use code "C10 Talk" at check out and Save Big!


The Leaders in Automotive Air Management.

I spent a few days running around Barrett Jackson Scottsdale 2019 and grabbed a few interviews along the way. 

Dan Hogan - @hogieshine - sold two trucks, a 1964 C10 Longbed with 9.1 original miles "Lambrecht Trucks" and a 1968 K10 that was a completely fresh build Dan and his son built. 

Todd Carpenter  - @bigfishgarage - sold tow trucks as well. A 1986 K10 short bed - fresh build, and a GMC Crew Cab Dually with an "Indy Hauler' theme to it. 

Mike Blackwelder - @67patriach  - sold his Custom 1967 C10 


It was fun to see a few of the fellas throughout the week and there was no shortage of C10 Trucks (91 - on my count) this year at Barrett Jackson. The Top Seller was a 1969 K10 - that sold for $137,500 with fees. Damn Son!!


Jan 25, 2019
Cheyenne Lord

Episode #123 is brought to you by this Rad Ass C10 Sponsors!

www.accuair.com - The leader in Air Management.

brotherstrucks.com - Your #1 Source for 1947-87 GMC and Chevy Truck parts.

www.ClassicPerform.com - Use "C10 TALK" at check and save 10%.

www.dakotadigital.com - Have you seen there new RTX gauges - DAMN SON! 

Cheyenne Lord invited me over to his casa and we laid down some Pod and a shit ton of rubber. 

Cheyenne is the proud owner of the Diesel Brothers, SM/CO C10 that was built on the Diesel Brothers TV show. 

Cheyenne has owned a few C10's along the way, and while watching the TV Show one day he got a hair up his ass and thought why not build a diesel C10 with this dudes. The rest is TV history. 

Cheyenne will be selling the truck this Saturday at Barrett Jackson in Scottsdale, Arizona. 

Will the truck sell for more then Cheyenne has in it? Well I guess we'll have to sit back and see how it all shakes out. 

I have a great time, thanks for sitting down with the C10 Nation Cheyenne. 

Jan 18, 2019
2019 Intro Episode

Happy 2019 C10 Nation!!!

Ronnie talks about upcoming ideas for the Podcast in 2019. He runs over how himself and 9 others were able to finalize the Top 10 trucks for the C10 Nation, C10 of the Year 2018. 

You can vote at www.c10nation.com

Sam Castronova stops by to pick up his "Best episode of 2018" trophy, voted on by you  - the C10 Nation. 

That turns into a 30 minute episode catching up with Sam. Finding out how people responded to his episode and catch up on his current build Palo, and that has happened since we talked to him last. 

One of new feature is a voice mail tab on the website - leave us a comment and let us know how were doing or if you have something you feel you really just either want to get off your chest or unload on the C10 Nation. 

Until next week - have a good one, Ronnie


Jan 10, 2019
Painless Wiring

Episode #121 is brought you by these Rad Ass C10 Companies. 





Check out our sponsors, they are true to our community and provide the BEST in C10 Aftermarket products. 

Episode #121 I sit down with Andrew Erichsen from Painless Wiring  www.painlessperformance.com

They provide complete wiring harnesses for our trucks and the quality to re-wiring your truck is second to none. 

Thanks Andrew, it was great getting to chat about all things Painless. 

Dec 19, 2018
Mar-K Quality Parts

Episode #120 is brought to you by these Rad Ass C10 Sponsors - remember to support those that support you. 






Big thanks to Magna-Flow for the booth and studio set up at SEMA, and Chris from Shout Engine, who make it all happen. 

I was able to sit down with David and JD from Mar-K Quality Parts. www.mar-k.com

We talk all things bed wood, and trim. Truck molding, and their new HIGHLY ANTICIPATED 73-80 "Squarebody" side molding that will debut Jan. 2019 and is available now at www.squarebodymolding.com

We also are excited to announce a voting pole on our home page www.c10nation.com where you can vote for your favorite episode of 2018. 

Thanks for listening and please remember to share, rate and review the podcast. 


Dec 04, 2018
Dino's Chevy Only Git Down!

Episode #119 is brought to you by these Rad Ass Sponsors. 








Live coverage interviews from the 8th annual Dino's Git Down. New location and over 700 trucks - DAMN SON!!!

This 3 day event has easily turned into the C10 Party of the Year. 

Trinity "Its like a family reunion and Class reunion combined!" 


Nov 22, 2018

Episode #118 is brought to you by these Rad Ass sponsors. 





Jim and Mike Ring, co-founders of Ringbrothers, were born with fuel running through their veins and a passion for building innovative cars. As young as 10 and 11 years old Jim and Mike were doing body work and painting cars anywhere they could, including in their parent's basement and a friend's chicken coop.

The Ringbrothers shop, headquartered in the small town of Spring Green, Wisconsin, pulls double duty, serving as a collision and repair shop to the community in addition to delivering one to two custom built cars a year.

In addition to collision repair and custom builds, Ringbrothers also produces an entire line of high-quality billet accessories as well as custom fiberglass and carbon fiber pieces. The billet accessories combine form and function to create a truly unique look that stands apart with craftsmanship and build quality that is second to none. The Ringbrothers line of fiberglass and carbon fiber body pieces gives fans the opportunity to incorporate the Ringbrothers signature style into their own builds.

Ringbrothers has rocketed into the top ranks of American car builders over the past decade, winning numerous design awards including the General Motors award for “Best Chevrolet of Show” at the 2014 SEMA Show, back-to-back Goodguys Street Machine of the Year awards, multiple Mothers Shine Awards, countless magazine covers, and several builds commissioned by OEMs.

Nov 14, 2018
SEMA ReCap - 2018

Ronnie shares his thoughts on SEMA 2018, from a C10 perspective. 


DAMN SON there was a lot of RAD ASS trucks. 


Kudo's to all the amazing builds and builders! 

Nov 08, 2018
SEMA 10, Squarebody Syndicate - SS02

SEMA 10, #10 - I sit down with the C10 Doctor, Rob Yezzi and Broey as we talk about SS02. 

This Indy Hauler inspired build I'm sure from the sounds of it WILL NOT DISAPPOINT. 

Much like its predecessor - SS01, I have a feeling this thing will add to the Joe Yezzi legacy of builds. 

This classic will be unveiled at SEMA 2018, this Tuesday in the Royal Purple booth - #23061 at 10 am - Central Hall. 

Thanks for sitting down with me fellas, always a pleasure and I know ALL of the builders were crunched for time. 

These episode's wouldn't be possible if it wasn't for these guys taking the time to sit down with C10 Talk and spread the word to you  - the C10 Nation! 

Episode #116 is brought to you by 

www.prp.com - Seal your build right, ask for Precision Replacement Parts. 

www.us-mags.com - Have you seen their lastest wheels, head over to their website and check them out. 


Oct 27, 2018
SEMA 10, #4

Robby and Rad Fab Tanner - 1964 C10 

TMI Waylon - 1967 C10

Lyon from Finish Line Speed Shop - 1978 GMC truck, and a 1966 GMC Suburban. 

3 more kick ass builders, building rad SEMA rides. 


Oct 24, 2018
Josh Shilling & Travis Pruis

Episode #114

Josh Shilling - Pro10, this thing is straight Race Truck! 

Travis Pruis  - The Man over at CTP Concepts is building a 1967-72 C50 Crewcab, Duramax car hauler! Damn Son!!

I'm thinking we might need to get these two together for a picture! 


Oct 18, 2018
Brad McKinnon - 1948 Suburban "CarrYall"

#113  - is brought to you by 

www.prp.com - Seal your build right!

www.us-mags.com - check out their killer wheel selection!

Brad Mckinnon is back, with his rescued 1948 Chevy Suburban Carry All. 


Brad will be in the Doug Thorley booth at SEMA with this killer build and we were able to get a with him and talk all things "CarrYall"!! 


Oct 12, 2018
SEMA 10, 2018 - Part #1

First 3 Builders of 2018's SEMA 10 Show. 

Jack Frith of Redemption Trucks

Brian Vowell of Frontier Shop Supplies


Travis Dulgerian of Pro Performance. 


Oct 10, 2018
Chris Hamilton

Episode #111 is brought to you by 

www.brotherstrucks.com - Your #1 Source for all of your 1947-87 Chevy and GMC restoration needs. 

www.azproperformance.com - When you want to upgrade from stock - call Travis and Nick, They know C10 Trucks!

www.accuair.com - Have you seen the ENDO AccuAir system, you need to!! Revolutionizing the Automotive Air Management industry. 

www.classicperform.com - Remember to use "C10 Talk" to save 10% off your entire order. 


Chris Hamilton is an East Coast guy with a diverse media background, from print, digital and marketing. His biggest asset is his passion for the truck industry and scene. 

He is the new Editor and Chief of Street Trucks and the C10 Builders Guide. He has 4 issues out and plenty more on the way. 

Good luck in your new job and we look forward to plenty of Rad Ass issues. Don't forget about us C10 guys and Blood, Sweat and Gears! 

Oct 03, 2018
First Ride Friday

First Ride Friday #6 with Street Trucks Editor and Chief, Chris Hamilton. 


This Episode is brought to you by - 

www.us-mags.com - check out their website, I promise you'll see something you'd like to have. 

www.prp.com - Precision Replacement Parts has a "Vent Window Refurbishing Program" that you need to check out. Save yourself the headache and time - send them into PRP. 

What was Chris's first ride? Well, it was a Chevy, and it was a truck. I guess you'll have to check out his "First Ride" episode to find out more. Thanks Ronnie

Sep 28, 2018
C10's in the Park - 2018

Over 900 C10's in the Park, in one day! Damn Son!! 


#110 - is brought to you by this Rad Ass Sponsors. 

www.classicperform.com  -Use code "C10 Talk" and save 10% at check out.

www.dakotadigital.com - Have you seen the latest in digital gauges with that classic look we all love - RTX!!

www.mar-k.com - remember to use "C10 Talk" and save 10% off your bed wood, bed wood hardware and bed wood strips. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy & GMC restoration parts. 


C10's in the Park - I was able to grab 10 great interviews from the show. Waxahachie didn't disappoint. 

Great people, killer trucks, and the C10ville!

Sep 27, 2018
C10 Intervention Pre-Show

This is C10 King approved. 

How about a little pre-show interview about the 1st Annual C10 Intervention, in Auburn California Sept. 16th 2018

If you have a Chevy or GMC 1908-1998 This is the show for you. www.c10intervention.com

Sep 01, 2018
Adam's Polishes

Adam Pilate has been cleaning and detailing things for over 35 years! 

He started by cleaning bicycle's, with his passion for cleanliness and helping others Adam built Adam's Polishes - One of the industry leaders in car care products. 


Adam is a great dude who is so damn passionate about car care and his story is on point. Im stoked to bring it to you C10 Nation. 

Adam is hooking us all up too! 

15% off your entire order and FREE SHIPPING through Sept, ending Oct 1. Use Code "C10 Talk" at check out!!!

I'll be loading up. Check them out. 

Episode #109 is brought to you by these Rad Ass companies. 

www.azproperformance.com - When you are ready to upgrade from stock give Travis and Nick a call. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts. 

www.mar-k,com - SAVE 10% off on all bed wood, bed strips, and bed hardware by using code "C10 Talk" at check out. 

www.classicperformance.com - Use Code "C10 TALK' at check and save 10% off your entire order - breaks, steering, suspension and so much more. 

Thanks for listening C10 Nation. Remember to share the podcast, rate and review for us. 

If you have any questions or concerns - email me www. ronnie@c10talk.com

Aug 29, 2018
Adam Pitale - First Ride Friday

First Ride Friday with Adam Pitale. Adam is the hard working, inspiring leader of Adam's Polishes. 

Adam's first ride was a '65 Mustang convertible with a 289. Talk about a sweet first ride, red too!

This episode of FRF is brought to you by - 

www.prp.com Seal your build right! 

www.us-mags.com Log on and check out all the rad wheels they have. I promise you you're going to find something that fits your style. 

Tune is next Tuesday for the full episode with Adam. Have a great weekend C10 Nation. 

Please remember to "like" the podcast and give us a review where ever you tune in! Thanks Ronnie 

Aug 24, 2018
AccuAir & CPP

Sponsor Spotlight #4



RAD!! Reno Heon from AccuAir stops by the C10 Talk Studio for the AccuAir segment!!

Aaron from CPP was cool too - lol, thanks Aaron for chatting! 

Tons of great content - AccuAir and the ENDO CVT info - obviously some "Trial and Air" but they have worked through it all and are killing it with the new set up. Orders are shipping and the retailers are slingin' these things. 

CPP - has the same thing going on with they're new Coil over bolt on kits as well. 

Tons of info on both of these interviews. Thanks for listening and please remember to share the pod, and leave us a review. Ronnie.

Aug 22, 2018
Mar-K & Brothers Trucks

Ya Buddy - 

www.mar-k.com For that free Catalog!

www.brotherstrucks.com - For all you truck needs and to sign up for that mailing list too. 

www.c10triplecrown.com - check out the Triple Crown. 


Todays Sponsor Spotlight I sit down with JD from Mar-K and we talk about a ton of stuff they have going on, especially their NEW 73-80 Body molding coming out very soon. 

I also talk to Steve and John from Brothers Trucks. Steve breaks some news about the 21st annual Show and Shine and we talk C10 Triple Crown and so much more. 

Aug 21, 2018
Precision Replacement Parts & Pro Performance!

Sponsor Spotlight with 




#2 of Sponsor Spotlight, I sit down with Derek Churchyard from Precision Replacement Parts and Travis Dulgerian of Pro Performance.

Let me know what you think of the Sponsor Spotlight. 

Please remember to Share the Pod, rate the Pod, and just plain ol' enjoy the shit out of the POD! 

Thanks C10 Nation, Ronnie

Aug 17, 2018
US Mags & Dakota Digital

We check in with Mario from US Mags and Greg from Dakota Digital and see what's new with them. What they have for you - the C10 Nation. 




Aug 16, 2018
Brandon Sisco

Episode #108 with Brandon Sisco is brought to you by these Rad Ass Sponsors - support those that support you! 

www.accuair.com The leader in Automotive Air Management Systems and the creator of ENDO & the ENDO system. 

www.dakotadigital.com - Have you seen their new Retro style HDX gauges - DAMN SON! Their Retro Rad. 

www.classicperform.com - When you need to upgrade your suspension, your steering and so much more. Remember to save 10% of your entire order, use code "C10 Talk" at check out to save!

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts. Check out their DIY videos on their website as well. 

Brandon Sisco has seen more, built more, lived through more then most do in a life time and he's only 42! Damn Son. 

Brandon is the lead fabricator for The Barrett Jackson Speed Shop, and formally of Sisco Fab. While working for Barrett Jackson, Brandon built the GHOESST - a one of a kind 1968 "Tahoe" style hard top SUV. 

If GM would have made one of these in 67/68 as possibly a concept and it sat for 50 years then was pulled from a shed somewhere. This is exactly what Brandon was able to envision and build.

Such an amazing, award winning creation! 

Brandon has been building and Fabricating since he was 15. He's had some crushing blows in his life but he keeps getting up. His mom's passing when he was 11 years old. His shops fire when he was in his early 20's, stress induced cardiac issues and so much more! 

Even though it seems like he's already built so many Rad Ass rides - I've got a feeling he's just getting started. 

Teaming up with the world famous Barrett Jackson Team is going put Brandon deep into the mix of classic builders and one off customs  - I can't wait to see what comes next for Brandon and his team. 

Speaking of team - Brandon and his amazing wife (Missee Sisco) will be teaming up on a SEMA 2019 C10 as well. 

Keep up the amazing GRIND Brandon and thanks for sitting down with C10 Talk - we wish you nothing but the absolute BEST brother. Ronnie

Aug 08, 2018
First Ride - Sisco!

FR#4 is brought to you by  -

www.us-mags.com - Check out their new 2018 series and much, much more.

www.prp.com - Everything you need to "Seal your build right" and killer video tutorials to show you how to do the job right too.


Brandon sits down and tells us about his FIRST! This bad boy was a Squarebody StepSide K10 that started off as an Uncle's $700 purchase to Brandon after he sold his 4H sheep to pay for it. 

Brandon and his dad went and picked up and Brandon really has been addicted to cars/trucks ever since!! 

Sit back as Brandon takes us on his journey and love affair with this Rad Ass Big Yellow Stepper. 

Its really cool to hear how vested Brandon was at such an early age and this truck has a lot to do with it. He cut his teeth on this bad boy and the automotive world, and the C10 Nation is better for it. 

Great story Brandon - Ronnie

Aug 03, 2018
The First "Git On Up"

Coverage and interviews from the first Git On Up. 

This Podcast is brought to you by these Rad Ass Companies. 

www.clasicperform.com - Use Code "C10 Talk" at check out and save 10% off your entire order. Damn Son!!

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy & GMC restoration parts - check out there DIY tech and video's while you're there. 

www.azproperformance.com - looking to upgrade from stock! Call Travis and Nick, and tell them I sent you. They have the products and the knowledge to get your C10 the way you WANT it! 

www.mar-k.com - the BEST in the business - side molding and SO MUCH more. The sooner you get that catalog, the sooner you'll know. 

The Canadians took GREAT care of us! We had a blast and got to see how they do it North of the Border. 

Friday we hung out at the host shop - a few Barley Pops where consumed! Saturday was a back country cruise - through some beautiful Canada Farm Country. Sunday was the show. 100 + trucks - not bad for their first show. Not bad at all! 


Thanks Darren, Justin, and especially Kevin Stickel and Fam. You guys rock. Ronnie

Jul 25, 2018
Digital C10 takes the mic!

Kevin Stickel takes the mic and interviews 

John Oro - C10 Club

Carlos Vidales - Dropped Lower

Payson Wetch - C10 Talk Jr.

Del Ushenko - Delmo Speed

Yours Truly, Ronnie Wetch - C10 Talk

Fun times ahead. 

This episode is brought to you by www.us-mags.com - check out their new 2018 Styles - and so much more. 

Jul 11, 2018
Brothers Trucks 20th Annual Show & Shine.

Episode #106 is brought you by these kick ass Sponsors - 

www.accuair.com - The leader in automotive air management and creators of ENDO. 

www.dakotadigital.com  - VHX, HDX, and NOW - RTX, check out their retro styling HDX gauges now. 

www.classicperform.com - Remember to use code "C10 Talk" at check out to save 10% off your entire CPP order. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration and aftermarket parts. 

Interviews from the 20th Annual Brothers Show & Shine. 

Jul 07, 2018
Auto Revolution

Episode #105 is brought to you by these Rad Add Companies! 

www.mar-k.com - So much more then just moldings. Check them out. 

www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy & GMC restoration truck parts. 

www.azproperfromance.com - When you're ready to upgrade from stock - they have what you need. 

www.classicperform.com - Use code "C10 Talk" at check out and save 10% off your total order. 

About time I sit down with Marcel and Jason from www.autorevolutiononline.com so much great content.

These dudes work very hard at bringing the automotive enthusiast so much rad ass online content right at your finger tips. 

If you haven't, check them out. 

Thanks to both Marcel and Jason for sitting down with me, Thanks fellas - goodtimes! 

Jun 28, 2018
Jason & Marcel - Auto Revolution

First Ride Friday is brought to you by 


Check out their killer selection online, from Rad to Retro Rad, they got you covered. 

Sat down with Jason Mulligan and Marcel Venable from 


And talked to them about their first rides! 

Had a blast fellas, #goodtimes!! Thanks Ronnie

Jun 22, 2018
Grant Cox

Episode #104 is brought to you by these Rad Ass Companies - Support those that support you. 

www.accuair.com - Have you seen or HEARD AccuAir's Endo CVT yet?

www.dakotadigital.com - When you are ready to upgrade those stock faded gauges, Dakota has what you need. 

www.ClassicPerform.com - Use "C10 TALK" at checkout and save 10% off your order. 

www.brotherstrucks.com - Your #1 source for 1947- 87 Chevy and GMC restoration parts. 

Grant Cox, the Kansas Man behind the camera. 

I had a great time getting to know Grant Cox. He is truly passionate about all things automotive and takes great PRIDE in making sure he delivers the absolute best product for his customers and their rides. 

Thanks Grant, Ronnie

Jun 20, 2018
First Ride #2

First Ride Friday with Grant Cox is brought to you by


Grant Cox is a remarkable photographer who has shot multiple cover trucks, SEMA trucks and much more. 

Hear about his "First Ride" a 1980 Datsun truck his dad handed down to him when he was 14, in 1989. 

I'd digging this First Ride thing - let me know what you think, Ronnie

Jun 15, 2018
First Ride Friday

This Episode of First Ride Friday is brought to you by 


New series where Ronnie discuss with his quest their "First Ride". What it was, and what it meant to them or maybe means to them now. 

Also  - their "First C10/K10/K5" was as well. 

So I Starts things off with his "First Ride" which was an '81 Plymouth Horizon Mizer. 

At the time, it wasn't his favorite, but it grew on me and as an adult with a son about ready to drive it was wheels, non the less. 

Thanks for tuning in, have a great week C10 Nation. 

Jun 08, 2018
Friday 15

This Friday 15 is brought to you by www.us-mags.com 

Update on the Run to Brothers and a listener reaches out about finding a long lost truck that he grew up riding in and would like to get back into the family! 

Thanks for listening and have a great Weekend - IT'S FRIDAY C10 NATION - act like it!!! Cheers, Ronnie

Jun 01, 2018
Pinstripe Chris

Episode #103 is brought to you by these Rad Ass Sponsors. 


Use Code "C10 Talk" at check out to save 10% off your entire order. 


More then just trim! Some of the sickest bed wood out there. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.

www.azproperformance.com - When you want more then stock! 

Good time sitting down with Chris Dunlop aka Pinstripe Chris @pinstripe_chris - This Dude is so damn talented - he has it. Vision, passion, and most importantly WORK ETHIC. 

Check out his social media and follow along as he creates some of the coolest shit out there. 

Thanks Chris, Great getting to know you brother, Ronnie


Kevin Aguilar's new media format is Instagram @fuelishmedia

Brothers Truck show - June 24th, details at www.brotherstrucks.com

This will also be the first leg in the C10 Triple Crown - details on website below. 


July 14th in Tennessee - 8th annual Southeastern Chevy/GMC Truck Nationals. 

www.gmtruckshow.com -

July 26th - 28th Oregon State Fairgrounds - The Awakening

Aug 11th - All Squared Up  - Dawsonville, Georgia www.jwl1976@yahoo.com

C10's in the Park - Waxahachie, Texas - Sept 15th 




May 30, 2018
K5 Kraziness

Quick bonus episode  - 


I have been looking to get a 73-75 K5 Blazer, well I ended up getting 2 in a weeks time. 

How in the hell!! 

Have a great Memorial Day Weekend C10 Nation. 

Thanks for the continued support  - Please remember to share the podcast, and rate and review the show. 


May 26, 2018
C10 Nationals

Episode #102 is brought to you by these Rad Ass Companies - remember to support those that support you. 

www.accuair.com - Makers of the ENDO air management system. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy & GMC restoration parts. 

www.classicperform.com - Use code "C10 Talk" at check out and save 10 % instantly. 

www.Dakotadigital.com - Is it time to upgrade those old faded stock gauges. Dakota Digital has a perfect cluster for you. 

Episode #102 is interviews from the first C10 Nationals Truck show at Texas Motor Speedway in Fort Worth Texas. 

I was able to interview some heavy hitter in our scene, Becky from LMC, Pat Maxwell - the "Hired Gun", and Mr. Rob McGregor from No Limit Engineering. 

This is just a few - so get your ass out in the garage, the shop, or under the shady tree - turn up the C10 Talk and start wrenching. 

Thanks for listening and all the continued support C10 Nation, Ronnie

May 21, 2018

Tune in Tuesday May 15th on Velocity at 9pm Central  - for the premier of Wrench'd with Justin Nichols and the rest of the rest of the crew from Watseka, Illinios. 

May 12, 2018
How to Restore your Chevy Truck, 1973-1987

Episode #101 is brought to you by these Rad Ass C10 Companies. 

www.mar-k.com - More then just body molding, bed wood and so much more, check them out. 

www.azproperformance.com - When your ready to upgrade ANYTHING on your truck - Call Travis!

www.classicperform.com - Use "C10 Talk" at checkout and save 10% off your order. 

www.brotherstrucks.com - Your #1 Source for 1947 - 87 Chevy & GMC restoration parts. 


Congrats Kevin and thanks for sitting down with us. 

If you are looking to restore a 1973 to 1987 Chevy or GMC truck, you need this book. It's a must have for anyone looking to build or even own a 1973 to 1987 Chevy Truck. 

May 08, 2018
Dino's back!

Episode One Hundred!!! 

Dino Battilana - Mr. Chevy Only

Its been over 3 years since we sat down with Dino and caught up! 

A lot has happened - Trucks, The Git Down, Marriage, Trucks, Other Hobbies, Trucks - Life is good, and Dino is proof that our C10 Scene is kicking butt. 

The Trucks are Cool, but guys like Dino are Cooler! Thanks Big Kat for everything, Ronnie

Episode #100 is brought to you by these Rad Ass Companies. 

www.accuair.com - The leader in automotive air mangagment - AccuAir!

www.dakotadigital.com  - Is it time? Time to replace those old faded, worn out gauges! Dakota Digital has what you need. 

www.classicperform.com - Use "C10 Talk" at checkout and save 10% off your total order. 

www.brotherstruck.com - Your #1 Source for 1947-87 Chevy and GMC restoration truck parts. Brothers! 

Remember to share the podcast and please leave us a review. 

Apr 26, 2018
Audio Tech

Episode #99 is brought to you by these kick ass Companies! 

Support those that support you!





Audio Tech with John Myers from Kicker Audio. 



John and I talk all things automotive audio.

What's the best format to listen to your music?

Where should you put those speakers?

What is the best way to power your system? 

Should you have your system tuned? By a Pro?

How much do you need to spend on a "good" system?

So much more - great guest and I had a blast, thanks John - Ronnie

Apr 10, 2018
C10 Nationals Preview

C10 Nation - Here is a quick update to the Upcoming C10 Nationals truck show coming up next month May 4 & 5th. 

The show will be held at Texas Motor Speedway in Fort Worth Texas. 

There will be  - 

Burn Out contest


Swap meet

Vendor Midway


And you can WIN a 1985 C10!!! 


For any further information. 

Apr 04, 2018
Nick Germano

Episode #98 is brought you by this Rad Ass Companies! 

Just saying - support those that support the pod! 

www.mar-k.com - More then just body molding, a lot more! 

www.dakotadigital.com - Time to swap out those old gauges? 

www.classicperform.com - From big breaks to drop spindles, CPP has it and you save 10% when you use code "C10 Talk" at check out. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.

Nick Germano from Outkast Kustoms has been getting a lot of attention with his killer 68 Chevy C10. If this truck could only talk! Form one owner to another, finally falling into Nick's hands and someone with not only the vision but the team, including the infamous Bob Grant to see the build through. From SEMA 2016 and 2017, to cover of Street Trucks, and his recent hardware, Best of LST 2018! 

Nick has worked with Clint the original owner and Bob to keep parts of the original theme intact, yet adding his own spin to make it his! 

Nick, recently married has a new addition coming to the Germano family, and were not talking about an S10 Blazer, either. 

Thanks Nick, grateful for your time brother. Congrats on all of your recent trophy's and most importantly, Baby Germano! 


Mar 29, 2018
Appraise & Wreck

Episode 97 is brought to you by  - 

Brothers Trucks

Classic Performance Products - CPP


Az Pro Performance



Mar 21, 2018
Eastbound & Down 2

Episode #96 is brought to you by these rad ass sponsors. 





For C10 Talk and C10 Nation gear head to www.c10nation.com


We made the journey - and we made it a fun one! Over 2500 miles round trip from Phoenix, and some logged over 4000 - Damn Son! 

The trucks are cool, but the people are cooler! 


Mar 13, 2018
Lone Star Throwdown

Episode #95 is brought to you by these kick ass companies - 

Support those that support you! 

www.dakotadigital.com - When you are ready to upgrade those old stock gauges. 

www.mar-k.com - more then just body moldings, exotic bed woods and so much more. 

www.classicperform.com - use "C10TALK" at check out and save 10% off your total order. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration truck parts. 


Episode #95, 8 killer interviews from builders from across the country. 

Texas, Oklahoma, South Carolina, Iowa, Louisiana, Colorado and Japan, Yep - Japan!!

Mar 03, 2018
Sam Castronova

Episode #94 is brought to you by these Rad Ass Companies - 

Brothers Trucks


AZ Pro Performance

Classic Performance  - CPP

Sam Castronova has been a fixture in the C10 Community as a back yard builder, a SEMA builder, a friend and so much more. Follow along as Sam tells us about how he discovered Delmo, Dino, Joe Yezzi, Blake Stoner and so many more! 

You will laugh, I guarantee it - I had a great time sitting down with Sam in his garage and I look forward to seeing what he does next. 


Feb 14, 2018
Let's C10 Talk!

Ronnie sits down and talks with a few listeners that submitted questions. 

Sitting down with the listeners, the C10 Nation and interacting with the questions that they have was fun. 

If this is something the listeners like we will continue to do it. 

Thanks Ronnie

Jan 30, 2018
Stacey David

Episode #92 is brought to you by all of the C10 Talk sponsors for the kick off 2018 Episode. 

Brothers Trucks

Classic Performance Products - use "c10 talk" at check out and save! 


AZ Pro Performance 

Mar-K Quality parts

Dakota Digital 

Stacey David. Gearz TV

Tell us about Stacey David?


How’t you get into wrenching?

Self taught?

What have you been up too? That tow truck is pretty bitchin!

Talk about "Trucks"  talk about "Gearz".

Trucks with Stacey David - was like Saturday Morning Cartoons to me!

Social Media?

How long TV?

4x4 trucks too = I think it was like a Purple Bronco.

Sergeant Rock!

Lets talk about Copperhead? Did it turn out the way you guys had planned?

572 BB motor?

Bucket list? for a guy that gets to build some rad shit! What’s your favorite style truck(s)

Whats your favorite part of the build process?

What cars do you currently own?

Favorite truck? Did you have a Dodge Truck Lil’ Red Wagon at some point?

Guitar collection and you’re a rocker - who’s your favorite band/group?

I hear there is another C10 in the works?

Any 2018 Plans?

Stacey was a great guest and I really enjoyed talking with him. Thanks gain Stacey - I look forward to meeting you in person someday, Ronnie

Jan 11, 2018
Year End Contest

Everyone who enters has a chance to win! 

$50.00, $100, and $250 Gift Cert for C10 Nation/C10 Talk store

C10 Builders Guide

Aerial Photo of Dino's Git Down

Plus much much more! 

Merry Christmas and Happy New Year C10 Nation, Ronnie

Cheers, here's to 2018!!!!




Dec 22, 2017
Centennial C10

Episode #91 is brought to you by these Rad Ass Sponsors. 





Rich Downing and the team from the Chevrolet Specialty Vehicle Program built a 1967 C10 Shortbed Fleetside for their Centennial program and not only is this truck stunning and very tastefully done - it was in the Chevrolet booth and SEMA and we were lucky enough to have Rich sit down with us and talk about this Sweet C10. 

I think the best part is Rich is a C10 guy, he has a C10 and he grew up C10 and GM. Thanks Rich, appreciate your time brother, Ronnie

Dec 13, 2017
Git Down 2017

Hell Ya - Git Down 2017 was a HUGE party, a HUGE success!!! 

Interview from the Git Down, Episode #90 is brought to you by these Rad Ass Companies - when you are building a truck, you want these companies behind you - their products, their expertise, their support! 

www.accuair.com - The Leader in Air Management and the creator of ENDO - to Check out ENDO and all of its possibilities accuair.com/cvt

www.brotherstrucks.com - Your number 1 source for 1947-87 Chevy and GMC restoration parts. 

www.dakotadigital.com - VHX or HDX, these gauge are the upgrade you need! 

www.classicperfrom.com - When buying Suspension, Spindles, LS conversions remember use "C10 Talk" at check out and save 10% off your order. 

Nov 30, 2017
Village Idiot Garage

Bonus episode as Joey and his wife drive from Manitoba Canada to the Git Down in a 1972 Chevy Truck. 

Roughly 3600 miles roundtrip - DAMN SON. 

Nov 17, 2017
David Freiburger

Episode #89 is brought to you by these RAD ASS Companies!!





David Freiburger the co-host of the successful YouTube show, Roadkill is also a C10 fan and has had plenty. He recently picked up a 1967 Longbed small window 6 banger and has big plans to go really fast with it - like over 200 miles an hour. DAMN SON!!

We also get some breaking news form David about Roadkill - and the future. Enjoy the show and Thanks Dave for sitting down with the C10 Nation, Ronnie. 

Nov 15, 2017
Scott France

Updates from Harry Daviess - GoodGuys and the 73-87 Trucks.

Update from John Oro - the C10 Club & Friends Toy Drive!

Update from Chevy Only Dino and the 2017 Git Down!!

Hotels - Courtyard by the Twin Peaks - 602-955-5200

Hampton Inn - 602-956-5221

Midway LS9 Motor raffle - 602-760-3371

Episode #88 is brought to you by these Rad Ass C10 Sponsors. 

www.accuair.com  - Preorder your CVT now! Ships out Feb. 1, 2018.

www.dakotadigital.com - Upgrade those stock faded gauges. 

www.brotherstrucks.com - For all of your C10 restoration needs. 

classicperform.com - Use "C10Talk" to save 10% of of your order. 

Scott France is the Metal Fabricator at Classic Car Studio Speed Shop in St.Louis, Missouri - He is a C10 guy at heart and also the man behind the builds you see on Velocity's "Speed is the new black!" 

Great guy and one hell of a fabricator. Thanks for siting down with the C10 Nation in the MagnaFlow booth at SEMA. Good luck in 2018 my brother, Ronnie. 

Nov 13, 2017
The SEMA Show

Episode 87 is brought to you by these Rad Ass C10 Companies. 





SEMA 2017 


OK so we knocked out the 22 interviews so If you can get an idea of all the killer builds prior to SEMA and now you can catch up.


-1Roadster shop - 66, wow - this interior

-2Vince Choppin block - cool square - but the coolest thing about this truck was it wasn’t the flashiest C10 but it was built in a week - damn

-3Robby Cartel - had a pretty sweet 64-66 that was wrapped a bunch of time. check it out

-4Tinman 2 Kustoms - had a rat rod set up with a trailer - and a 64-66 long bed in tow

5TMI interior who has had some killer C10’s in there booth for the last few years

6Diesel Bro’s outside

7Orange/White outside -

8ryan Decol from Utah had a nice 67 in the Mothers booth

-9Douglas Interiors - Jeff from Nostaglgia

-10GHOEssT 1967 NOT BLAZER!!

11Brett Oakes - Rad Red Crew Cab Dually

12Western Iowa Green 64-66

13GSI - 66 “reminded” me of Lafawnda

14The Jambulance - Diesel powered 72 Ambulance

15Darin from DWS had a really nice 66

16California Speed and Customs OG paint 73/74 square.

17 1972 that Brandon Sisco buildt - was in the Barrett Jackson booth.


So close to 40 C10 trucks - Yes - I would day we are in the middle of the C10 Movement!! - DAMN SON!!!


So what did I do all damn week - Well Royal Purple said do you want to do interviews?


I was like - hell ya. They said we also want to have a “C10 Nation” day. I was like i like the sound of this. Win/ Win.


So I did interviews for Royal Purple and thought - oh ya - ill knock out interviews after that. Well It was tough.  and the video guy had to go edit video. So we just did a few C10 Talk Facebook live videos - they actually have gotten some good traction. So check em out.


I’m not sure if I can pull em off and drop them into YouTube - but that would be cool.


I was also able to do some pod - in the magna flow booth - Ill get those out asap too.


Ok - so SEMA - Monday was pretty chill as we were getting the lay of the land - We shot a few video’s with RP and That was a good get things going day. I liked Monday - as it was chill enought - but all the fellas where either there or rolling in. So we got to help a bunch of guys and see rigs roll in - which is always cool


Tuesday - Opening day - Halloween. Oh man - so many people and trying to be at two differt places at once - because a lot of people do their unveils that day. All in all great day and fun night - I think we all went to the Piano bar that night. I didnt realize it but it was loud and i was probably yell/talking - so that next day my voice was not feeling to good.


Wed - more of the same, I would knock out some interviews and try to get out to see trucks i wanted to see. Man the one truck that had people around it at all times was Craig Piggots - River City Rods - EPIC C30 Camper. From TV people to everyone people - it was a fan fav and a SEMA hit. He had that thing loaded with alcohol - hell ya it was a hit.


Thursday - C10 NATION DAY - the banner, the truck, the shirts, and most importantly the people!!


but we grabbed a quick shuttle and headed south towards Hendo/Boulder for some Off road trophy truck fun - Torq and Tacos


Friday - Run and gun, tried to see as much as I could. I rally wanted to check out as many trucks or even cars that I hadnt seen.


A few other “Damn Son” trucks were Unruly and Duke  - they were must see’s on most people’s lists - including mine.


My personal favorites that I actually got around to seeing.

Best motor - Sam Castronova - '79 C-Minus

Best Wheels  - Sam Castronova

Best Interior - Jeff from Nostalgia Hot Rods - '67

Best paint - Oscar - Ikandy damn son!!!

Best accesory - Preston had a harley in the truck


My favorites - Camper/GHOEsst/Duke


Non- trucks - the 69 Charger built by BBT Fab

Split Sec  Camero - built by Roadster Shop

Twin Turbo Tucker built by Rob_Ida


New Products -


Choppin Block - new

Precisesion Replacement parts re-builds wing windows


speaking of NEW- our SHOP TOUR video is out on You tube.




Git Down -


Motor give away - LS9 - capped to 240 tickets


Toy drive


Wrap up the year and get ready for next year.


I am already working on some killer guest.


If you have someone you really want to hear form let me know.


Stacey David


Farm Truck - Sean “farm truck” whitley


for next year and all these killer SEMA builders - especailly Brandon Cisco - etc...




have a great week.



Nov 08, 2017
ALL C10's Welcome!!!


All C10 Truck's will be allowed into Goodguys! The Goodguys team is going to allow all the 73-87 Squarebody's into GoodGuys this November for the Scottsdale Final. 

They are offering a 3 day pass - Friday, Saturday, and Sunday including a GoodGuys Membership for $65.00 - That's a great deal. 

You will also be able to sign up at Dino's Git Down on Friday night as well. This means if you can't get registered on Friday, and you don't want to sit in line Saturday you can do it Friday at the Git Down. 

Nice Work GoodGuys! 






Nov 08, 2017
SEMA Show #6

Richard Ruiz - 68 4x4 Blazer

Sam Castronova - 79 C10 C-Minus

Oscar - C10 Fire Shot

Roger Burman - Unruly 1966 C10 

Blake Stoner - Savage 49 and 58 Slamio

Oct 29, 2017
SEMA Show #5

Episode #85 -s brought to you by - 






Three more SEMA builders sit down with Ronnie - 

Marc Mullins- @bloodsweatandbeaerd

Craig Piggot - @rivercityrodsia

Todd Carpenter - @bigfishgarage



Oct 27, 2017
SEMA Show #4

Episode #84 - More SEMA Pre-Show interviews. 

Episode is brought to you by - 






This Episode is with - 

@c10crew and his 1968 2wd Blazer.

@gregtheegent and his 1970 GMC 2wd shorty

@leftcoastC10 and his 1968 C10 shortbed. 

@ctpconcepts and his 1966 Service Truck.

Oct 26, 2017
Jason Kable - SEMA Show #3

What an ISPIRATION this story is! Jason is building a 1984 C10 for his dad and they both will be going to SEMA with it. They will be in the American Force Booth #45109. 


Oct 24, 2017
SEMA Show #2

Round #2

Episode #82 is brought to you by - 





SEMA Pre-show interviews - 

Jason Bullock - Bullock Body Werks

Tino Garza - Maxbuilt Customs

Jeremy Rice - Tre5 Customs

This guys are kicking ass, and we appreciate their time to sit down with C10 Talk and the C10 Nation. 




Oct 22, 2017
SEMA Show #1

We sit down with 

Preston Folkstead, R-Tech Fabrication, Bogi Lateiner, and Justin Nichols and talk about their killer builds for SEMA. 

Oct 18, 2017
Aaron Kaufman

Episode #80 is brought you by these Rad Ass Companies. 

www.accuair.com - The creators of ENDO! 

www.classicperform.com - use "C10TALK" at check out to save 10% off your order. 

www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC restoration parts. 

www.dakotadigital.com - You need to check out there new HDX gauges - talk about an update!! Damn Son. 

Aaron Kaufamn - formerly from the hit Discovery show Fast and Loud, and Gas Monkey Garage sits down with Ronnie from C10 Talk. We talk about so much more then trucks and cars. How the hell did Aaron even get into automotive. 

The biggest news yet is when Aaron tells the C10 Nation about his new show "Shifting Gears" that will also be on Discovery Channel this Spring 2018. 

Aaron was a great host and even gave us a tour of the new shop. I will get the shop tour and parts of the interview up on YouTube as well - so look for that to hit the C10 Talk channel in a week or so. 

Remember to share the Pod with your friends and family. Take a few minutes and leave us a rating as well. Thanks Ronnie

Oct 09, 2017
C10's in the Park

Episode #79 is brought to you by these Rad Ass C10 Companies - 


When you are ready to upgrade from stock - think Pro Performance.


More then just side moldings - over 5000 parts. Mar-k!


Your #1 source for 1947-87 Chevy and GMC restoration parts.


Remember - when checking out use "C10 Talk" and save 10% of your total order. 


C10's in the Park - Waxahachie Texas - Over 750 Chevy/GMC trucks -I had a blast meeting and interview various truck owners - I hope you dig it - I know I did, Thanks Ronnie

Sep 26, 2017
Gears Wheels and Motors

Episode #78 is brought to you by these Rad Ass C10 Companies. 

Support those that support you and your passion! 





Ryan Brown is based out of Houston, Texas. He has been affected by Hurricane Harvey as of late, but he runs www.gearswheelsandmotors online where you can see rad video's of killer rides from car shows allover the country. 

Sit back and hear how Ryan got his start and why he is so damn passionate about his new found talent. 

Great guy - thanks Ryan, Ronnie

Sep 14, 2017
Diesel Swaps

Episode #77 is brought to you by these Rad Ass C10 Companies. 

www.mar-k.com - more then just trim.

www.classicperform.com - use "C10TALK" at check out to save 10%

www.brotherstrucks.com - your #1 source for 1947-87 Chevy and GMC restoration parts.

www.azproperformance.com - looking to upgrade from stock?


I had blast talking to Paul over at the Diesel Performance Podcast. We cover Cummins and Duramax swaps in your C10/C20/C30 - K10/K20/K30 and whatever else you may want to drive. Why it makes so much sense to consider putting one of these proven power plants into an old Chevy/GMC truck. 

I encourage you to check out their Podcast if you haven't already. 

You can reach Paul Wilson at the link below. I also have included the link to the 85' Scottsdale LB7 video as well. Enjoy Ronnie



Sep 06, 2017
3 Dudes 1 Truck


The Leader in Air Management and creators of the ENDO system.


When you are ready to upgrade those stock gauges - Dakota Digital is your choice. I did it and love them. 


Your #1 Source for 1947-87 Chevy and GMC restoration parts.


Use "C10TALK" at checkout to save 10% off your total order. 


3 Dudes and 1 Truck!!!!

Well I bought a 1976 GMC truck in Montana. Digital C10, C10 Acres, and myself make a Rad Ass Road Trip out of it. 

Follow along on the journey! 


Aug 30, 2017
Trip Tech

Episode #75 is brought to you by these kick ass C10 Companies - 





Trip Tech with Jason Polite from Dead End Garage. 

We talk all things pre - trip, during trips and much much more.

Aug 20, 2017
Travis Pruis

Episode #74 is brought to you by these Rad Ass C10 Companies!! 

Support those that support you! 

www.mar-k.com - More then just molding.

www.dakotadigital.com - Is it time to upgrade from stock gauges?

www.classicperform.com - use "C10TALK" at check out and save 10% off your order. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.


"Clarence" Travis Pruis - CTP Concepts


Who the hell is Travis Pruis?

Growing up?

Family - Mom/Dad/Brothers/Sister/and now - wife and son (twin) Travis John Pruis

How’d it all start?

Tell us about IF Customs

1 low sled - aka, the yellow IF 70.

Tell us about CTP Concepts.

battery hold down tray

Accuair ashtray pull out tray.

Current builds - just wrapped up “Ol’Bluey” Service truck for Pacific Coast Locators.

Favorite personal build - the Goat? The 71 Ranch Truck K20

Favorite build built by another, Why?

Builder you look too, Why?

Company that blows you away, Why?

What advise would you tell /give 16 year old Travis?

What advice would you give a young builder trying to get into building/fabricating custom cars/trucks?


MISC - C50 Car hauler/ Ol Bluey rendering - etc... - HOLY SHIT!!

Plans for the 71/72 Ol Ed Orange GMC orange truck.

Bucket list?

Where do you see yourself in 5 years?

Trends you see in our scene?

WOW - what a great time I had hanging and getting to know "Clarence" T Pruis. Great guy true to his roots and his family. I look forward to see what he does as his shop continues to grow. Rad Ass Dude that is exactly why the C10 Nation is what it is. We are all glad you made your way back to the scene brother. Thanks again for getting off track with me!!! 

Aug 10, 2017
Dakota Digital

Episode #73 is brought to you by these Rad Ass companies. 

www.mar-k.com - More then just trim. Check out all they do. Made in the USA.

www.classicperform.com - Use "C10TALK" and save 10% off your order. 

www.azproperfromance.com - Top 10 Dakota Digital Dealer - currently having a Dakota sale. 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts - and more!


I had a blast with Greg from Dakota Digital. I hope you enjoy the interview as much as I did. #goodtimes


 -History of Dakota aDigital. 

 -Souix Falls South Dakota?

 -30 years in the business?

 -How'd it all start?

  -Who was your original customer base?

Digital Instrument system?

Do you still move many of these? Can you still get them?

Was there a time when you guys could see the numbers weren't looking good?

What happened? What was done to kick things up?

OK lets talk about VHX?

Easy install.


So many options? Custom Options as well.

HDX - gauges? Whats new, whats better? Whey HDX over VHX?

Android interface? When? How have things been with the iphone interface?


Adding gauges? Boost, EGR, Tranny temp, Air pressure? LS LS LS LS LS LS!!!!!!

What are a few of the most common additions you see a lot?

Intstall - most common question?

Most common “custom” cluster?

What is the lead time on custom stuff?

Have you had any thing that kind of flopped?

Other stuff - LED - dimmers etc...

88-91 to 88-94 anything OBS??


Thanks again Greg, Scott and Ross. 

Jul 25, 2017
Back in the Saddle

Quick update of things going in the C10 Nation. 

I am putting together an Tech Episode about - "Trip prepping your ride" so I'd like your input on what you do to prep your ride. 

I will also be putting together the SEMA 10 Episode for 2017 - so if you are building a SEMA truck - let me know. 

Here is the link to the Aaron Kaufman - Jonathon Mansour article I talk about. 



Here is the C10 Builders Guide subscription link. 


Code - is A573H3U1

Please take the time to Rate and Review us - and share the podcast. 

Until next episode, have a good one C10 Nation, RW




Jul 12, 2017
7 Deuce

Episode #72 is brought to you by these Rad Ass C10 Companies. 

Support those that support you. 





Episode #72 is a hodge podge of stuff - we talk to Bryan Ashley from C10 Club Tennessee and the Southeastern Truck Nationals. We talk about the Squarebody Syndicate Run to Brothers, and we talk to participants and show winners of the 19th annual Brothers Trucks Show & Shine. 

Please remember to share the show and leave us a review. Have a great 4th C10 Nation. Ronnie

Jun 28, 2017
Next Gen C10

Episode #71 is brought you by - 





We sit down with 4 young men who are all C10 trucks builders. Great kids that come form great families. These 4 kids are all working on their trucks with friend and families. 

@next_gen_c10 - Ryan Villanueva

@c10kid - Eddie Franco

@c10briggs - Briggs Defibaugh

@zaccardibuilt_jr - Scott Zaccardi

Tell us about yourself?

How did you get into C10's?

Tell us about your truck?

What are your plans?

What is your favorite thing about your truck?

Favorite truck not yours?

Favorite builder? 

What do you pass on to other kids?

What is your favorite thing about the community? 

Thanks boys, the pleasure was all mine. Great to get to know you all a little better. You all should be very proud - you did a great job. Thanks again, Ronnie


Jun 13, 2017
Tino Garza

Episode #70 - Mr. Tino Garza, Maxbuilt Customs! 

This episode is brought to you by these Rad Ass Companies - 

www.accuair.com Check out the new ENDO-CVT, coming this Summer17'

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts and so much more. 

www.classicperform.com - Use "C10 Talk" and save 10% off your total order. 

www.dakotadigital.com - check our the new HDX gauges - bad ass!!

Tino Garza - Maxbuilt Customs out of Indio CA. 

Tell us about Tino


Growing Up?



How'd you get into trucks? What started it all for you?

One of the baddest/raddest stables around of custom killer trucks!!

Severed Ties?

Homecoming Queen

Lafawda - Double cover!!! SEMA 2015

Started  - Max Built - why?


You built Dimples SEMA 2016, under MAxbuilt - how was it going from customer to builder? It was really well recieved too - your first SEMA build - your recipe was a success - clean as fuck!

lost keys!

Dimple name is a cool story! right there on the hood!!

Whats the hardest part of running you’re own shop?

I know you were even thinking about trying to take Yoshi last year as well, Damn Son!! Big goals son.

So hows it going with Yoshi! You going to keep the keys to Yoshi


the list doesn't end there - how about the Blazer! And we must talk about Poncho!!!!

Do you work on others at Maxbuilt or do you find that its mostly just your personnel builds?

Do you have a builder that you tend to really look to for advise or inspiration?

SEMA three in a row, you going for 4 - 5??

Where do you see yourself in 5 years?

Bucket list builds



May 31, 2017
LS Fest West

Good Times - 

Show is brought to you by - 

Brothers Trucks - www.brotherstrucks.com

AZ Pro Performance - www.azproperformance.com

Classic Performance Parts - www.classicperform.com

Mar- K Quality Parts - www.mar-k.com

Live interviews from Holley's first LS Fest West at Las Vegas Motor Speedway. Dirst Track. Drifting, Dyno, Drags, Auto Cross, Show - n- Shine , Vendors and more. Good times!

May 17, 2017
Shane England

Episode #68 is brought to you by these Rad Ass sponsors - support those that support you. 

www.accuair.com Coming this Summer - ENDO- CVT

www.dakotadigital.com Is it time to upgrade our gauges? Dakota Digital has you covered. 

www.classicperform.com - use code "C10TALK" at check out and save 10% off your order. 

www.brothertrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts. 

Shane England - Big Kahuna Monster Truck - 1965 C10, or K10, or K20 - either way it's a KILLER truck, driven by a Rad Dude!!!


Big Kahuna Monster Truck - why that name?

Dude - tell us about Shane?

How did you get into Monster Trucking

Is it a family affair - I see father daughter teams. Father Son as well

Is it hard to get into Monster Trucking?

What is the best part?

What is the hardest part?

Do you have a mechanic? Chief Mechanic - or do you do it all?

How much HorsePower is in one of those things - straight pipes - so load!!

Is Grave Digger still the best?

Holy crap - first front flip?

Have you done a back flip?

Expensive? Profitable? Endorsements and swag to make money?


Why C10 or in this case a K20 as a shell? Why 64-66? Any other C10’s


Are you into C10’s

What is your daily

worst wreck /been hurt?

Those tires  BKT - holy shit how much for a set? 

How is 2017 looking? Do you travel a lot?

Goals - 5 years from now.

What do Monster Trucks drivers do when they retire from it?

Whats on your bucket list? Trucks? Monster Truck career - whatever?

What a great guy - thanks Shane, I had a blast chatting brother. Look forward to having a beer in the future with you. Ronnie

May 02, 2017
Cristy Lee

Episode #67 is brought to you by these Rad Ass Sponsors - 


www.brotherstrucks.com- Your #1 source for 1947-87 Chevy and GMC restoration parts.

www.azproperfromance.com -Revelator brake special good through April - $1800.00

www.dakotadigital.com -Upgrade your gauges with the best - VHX and new HDX.

www.classicperform.com - Use "C10TALK" at check out and save 10%

www.royalpurple.com - When you are looking for the best synthetic, think Royal Purple. 


Cristy Lee - the girl from Florida who is part of the awesome trio of the All Girls Garage on Velocity. She also is part of the broadcast team bringing you all that killer Barrett Jackson coverage. 

I sit down and get to know more about Cristy and how she got to where she is today. What were some of her challenges and what the future looks like. 

She didn't disappoint and is really a down to earth chic. 

Enjoy the interview C10 Nation, I know I did - thanks Cristy for the time and being Rad. I wonder if she'll give me a ride on her motorcycle now?  Ronnie

Apr 18, 2017
Brake Tech

Episode #66 is brought to you by these Rad Ass C10 Companies - 

www.accuair.com - Have you seen ENDO? You need too!

www.classicperform.com - Use code "C10 TALK" at check out and save 10%

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.

www.mar-k.com - More then just side molding - you'll be surprised!

www.dakotadigital.com - HDX gauges take your old to new!


Brake Tech with Travis Dulgerian from AZ Pro Performance. Sit back and learn about brakes. A Q & A session about all things brakes, from mild to wild we cover it. 

Thanks for listening - Ronnie

Apr 04, 2017
Girls Get It Done - One N Done!

Episode #65 is brought to you by these Rad Ass Sponsors! 






What a fun day - 25+ girls get together and kicked some serious ass. They installed a Street Grip static suspension from RideTech and some oh so sweet wheels from US Mags. I hope we bring you even a partial perspective to the fun these girls had with the Girls Only One n Done at Switch Suspension. 

Enjoy and C10 Talk is always honored to time capsule such fun times in the what the C10 Nation has going on in the community. 

The trucks are cool, but damn those girls are cooler!! 

Mar 28, 2017
GoodGuys Rod and Custom

Episode #64 is brought to you by these Rad Ass Companies! 

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy & GMC restoration parts. 

www.mar-k.com - Mar-k offers so much more then just body molding, check them out! 

www.classicperform.com - use code "C10TALK" at checkout to save 10% off your order! Hello, 10% off!!

www.accuair.com - The undisputed in leader in Air Management and the creators of ENDO platform! 

Harry Daviess is the VP of Event Operations - He travels throughout the show season from one Goodguys show to another. Talk about passionate!! 

Harry tells us about his job. 

History of Goodguys.

How many shows do you currently have?

Do you plan on adding more shows?

What is your largest show?

Best part of being the VP of Event Ops.

Worst part, or hardest part?

How about trucks? Have you seen more being registered? 

Any plans to let 73+ in?? 

How about adding a truck to your logo?

Maybe even adding a truck to your "make and take" model for the kids.

In closing - Harry is one Rad dude who gets it. He has a vision and Goodguys is in great hands and will be around for generations to come. Thanks Hary for taking the time to sit down with the C10 Nation. Ronnie


Mar 14, 2017
East Bound and Down to the Throwdown!

Episode #63 is brought to you by these Rad Ass Companies.

www.classicperform.com Save 10% by using "C10 Talk" at check out! its that easy!

www.mar-k.com - So much more then just body molding, Mar-K Quality.

www.accuair.com - ENDO - the most revolutionary air management system available.

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.

Follow along as we interview a few of the fellas along for the trip from Phx AZ to Conroe Tx. and so much more. We drive a 1973 Chevy C20 Crew Cab truck 2500 miles and have an absolute blast along the way. Oh ya, it has a house on the back too. Good Times!!!

Mar 08, 2017
Scott Laitinen

Episode #62 is brought to you by these kick ass sponsors! Support those that support you. 

www.classicperform.com  - use "C10 Talk" at check out and save 10% off your total purchase!

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC truck parts.

www.dakotadigital.com - Have you seen the new HDX gauges - change colors like the seasons. RADASS!

www.azproperformance.com - When you are ready to upgrade from stock!

www.royalpurple.com - When you want the best in Synthetic protection, think Purple!

Scott Lattinen - Sic Chops, Lake Havasu Arizona

Tell us about Scott - wife, wife kids? You know - life away from cars and trucks!! lol

How and why did you end up in Havasu?

How is the scene in Lake Havasu?

How’d you get into building Rad Ass Rides?

What is your speciality? Is there a phase you love? hate?

Tell us about the shop?

You see, to have a great recipe - Ron Mangus interiors, roadster shop, Colorado Customs, Accuair

likes to be challenged!

Does the owner of the Lincoln Marc ll (long, black and low) does he sell them or keep them.

Since youve been such a force at sema, do you get a ton of guys wanting your work?

How do you keep up? You have to limit it right? Don’t you get exhausted? the 56?

Family affair - is it hard, stressful working with family? How do you leave it all at the shop and not bring it home? I would think you would need a break sometimes.

Pic one build??


1961 Blazer!

OK - tell us about the Suburban turned Blazer?

How do you keep that a secret in todays world?

SEMA crunch? I know you said the Lincoln was a grind.

Did you want a wrap around window? Did the owner come to you? Did you already have the idea?

Did you know how you were going to go about it? Why 22”

Tons of Subtle differences - the rear wheel fender lip!


What was the hardest part?

Now that you've got to shake it down - what do you and the owner think?

Has Overcast been shot yet?


Awards -

SEMA, Goodguys Gold Bar award.

Grand National Road Show. - Outstanding Engineered Award, and 1st Place Class Awrd

Albuquerque - Super Nationals - Best of Show!!!

Is it hard to let them go?

If all the cars/motorcycles/trucks/customs you've built - The owner would give you one back - what one would you want back to keep and why?

I think you are know for building Sic Caddy’s and that 56 Lincoln Marc 2 - but I think you know are more then that - you have definitely showed your versatility as a builder.

What has been the high light so far for Overcast as the creator for you?

Bucket List?






Feb 15, 2017
RideTech 48 Hour Build

Episode #61 is brought you to by these #RadAss Companies

www.classicperform.com  **Use code "C10Talk" at check out and save 10% off your purchase. 

www.brotherstrucks.com Your #1 source for 1947-87 Chevy and GMC restoration parts. 

www.azproperformance.com Are you ready to upgrade from stock?

www.precisionreplacementparts.com Seal your build right. 


Episode #61 we head out to Barrett Jackson auto auction in beautiful Scottsdale, Arizona and join the RideTech team as the along with a dozen or so other companies re-build and update a 1968 GMC 1500 Short bed truck. The team works on the truck for 6 days straight. Completing it in 48 hours. The truck goes up on the auction block at the end of the week. 

Listen along to hear from the companies involved. Find out how much the truck will sell for and who the lucky bidder is. 

Good times, great people - thanks Bret, Ronnie


Feb 01, 2017
Classic Car Studio

Episode #60 is brought to you by these Rad Ass Sponsors - Support those that support you! 

www.accuair.com The Leader in Air Management - ENDO!!

www.classicperform.com Use "C10 Talk" at check out to save 10% of your purchase!

www.brotherstrucks.com Your source for all of your 1947-87 Chevy and GMC restoration needs.

www.dakotadigital.com Have your seen the new HDX gauges? You need to.

Classic Car Studio - Rocked the C10 Nation in 2016 when they dropped a Bomb on us - or was it a Bombshell! Tiffany is one of the hottest 1966 C10's ever built. Her Seafoam color only adds to her sexiness. Those Nelson Racing turbos. the metal work, the interior - oh damn that interior. The guys at Classic Car Studio - built one of the baddest trucks of 2016 and brought it to Vegas to show her off. At SEMA, she had a crowd around her at all times. To watch peoples faces as they approached her was hilarious - "oh shit" look at that truck!!!

Noah and Scott have a great thing going in St. Louis and watching them on Velocity each week with their new TV show - Speed is the new black should be fun. 

Thanks again for your time fellas - Cheers to much continued success, Ronnie. 

Jan 18, 2017
Rob Kibbe

Episode #59 is brought you you by these Rad Ass Sponsors. 

www.brotherstrucks.com Your #1 source for 1947-87 Chevy and GMC restoration parts.

www.classicperform.com Use code "C10 Talk" at checkout and save 10% from your CPP order - Damn Son!!!

www.azproperformance.com - Looking to upgrade from stock - Tell Travis I sent you. 

www.dakotadigital.com - Have you seen their HDX gauges yet? Great look, great style, and great performance. 


We catch up with Kevin Aguilar from Street Trucks and talk to him about the NEW precess for the Street Truck of the Year. This is a big award and I am sure the final 10 are honored to be in the running. This year Street decided to put it up to a vote. You can hear all about it and vote at www.streettrucksmag.com


Rob Kibbe is the host of two Rad Ass podcasts and much much more. 





Both of these Podcasts are on my play list and Rob does a great job hosting. Hi passion for Muscle cars and the Dukes of Hazard is unmatched. 

We the back story of how it all happened. Rob and Mike have great chemistry and make the show less about  the actual Dukes, and more about the good times. 

Rob seems to be building steam and I look forward to what he comes up with next. 

A great family man and ambassador to these timeless classics. Thanks for siting down with us Rob. Have a great 2017 brother, Ronnie






Jan 03, 2017
Trial & Air

Episode #58 is brought to you by these Kick Ass Companies - 


www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC truck restoration parts. 

www.classicperform.com _Use code "C10 Talk" to save 10% off your order. 

www.royalpurple.com - the leader in performance synthetic motor oils. 

www.azproperformance.com - When you're ready to upgrade from stock!

www.dakotadigital.com - Their VHX and HDX gauges will have you at GO!


Trial & Air - with Seth and Jason from Switch Suspension. 

I sit down with the guys and ask a ton of air suspension questions. Great info - jammed pack episode. 


Merry Christmas C10 Nation. 

Dec 21, 2016
Git Down 2016!

Episode #57 is brought to you by these kick ass sponsors!

www.classicperform.com - use code "C10TALK" and save 10% your final order.

www.frontiershopsupplies.com - bolt bin special - 2350 pieces grade 8 hardware!

www.brotherstrucks.com - Your number one sources for 1947-87 Chevy and GMC restoration parts. 

www.accuair.com - Have you seen ENDO? 


Episode #57 is a few stories that I pulled from the night. Nate @the_c10_profect is a 16 year old that has been building a C10 since he was 12 at his grandpa's shop in California. His parents and Grandpa - finished the truck and brought it out to the Git Down to surprise Nate. It worked. We were able to get Nate, Dad, and Grandpa all in the same room and capture their thoughts. 

Mrs Maggie Leigh Doiser from episode #50, and her husband Jason made their way out to the Git Down for a great time and reunite with old friends. They left with an LS3! Winning the Midway Chevrolet LS3 raffle! Damn Son!

We also recap the weekends festivities with Mr. Chevy Only Dino as well. This is the 6th Git Down and it keeps getting better like Johnny Walker Blue! 

Last but by far not least - John Oro and his C10 Club toy drive out in Pomona California. 

Great couple weeks for the C10 Nation. 

Thanks for taking the time to sit down and share your thoughts and stories guys ( and gal)! 

Next up - Trial and Air with Seth from Switch Suspension! 


Dec 07, 2016



SEMA 2016


Reno Heon.

Episode #56 is brought to you by these kick ass sponsors - support those that support you.

www.brotherstrucks.com - Your #1 source for 1947-87 Chevy and GMC restoration parts.

www.classicperform.com - What’s stopping you? - Use “C10TALK” code and save 10% off your entire purchase.

www.dakotadigital.com - Is it time to replace those faded original gauges? Check out there VHX and new HDX series gauges.

www.azproperformance.com- Are ready to upgrade from stock, AZ Pro has your upgrade options covered.

www.royalpurple.com - When you demand maximum performance!

Hell Ya! We were able to sit down with Reno Heon from AccuAir at SEMA 2016. The guys from AccuAir set up a small recording studio just of of their show room display and it worked. It worked perfect. Reno and I were siting right next to each other - really, like 4-6 inches and we had a great time getting the C10 Nation caught up on everything going on with The Leader in Air Suspension.

AccuAir just released their brand new ENDO-T, ENDO- VT, and coming Spring/Summer 2017 their new ENDO-CVT will be available to all of us!

Reno and I talk about the history of the company.

From the first few employee’s they had and how most of them are still with the company 15 years later.

It hasn’t always been easy! Reno talks about some o f the struggles they had in the beginning and working with family.

Reno admits that a ton of hard work, great timing, and some luck has helped his company prosper into what is now 15 years later the industry leader in Air Suspension. But admits that their customers are also such a big part of their success. Using AccuAir on their builds, promoting the products and being such loyal customers.

By day 4 of SEMA, Reno knows that the reaction to their new ENDO system is beyond well received by the masses. Their booth was popping all week in anticipation for the products. Scott Lattinen from SicChops was in the booth this year with their killer 62 Suburban, converted to Blazer - “Overcast”. Damn Son!

Reno, dives into the specifics of the ENDO, talking about the tank and its capacity, the R&D that went into if and how it is DOT approved.

The ENDO-VT, which is the new tank with the valves integrated into the new aluminum tank. The values are split, 2 on each side how ever the end user chooses.

We talk a lot about the new ENDO - CVT, which will be a compressor inside the tank along with the internal valves. So Rad Ass!

Multiple questions about the new system arise from so many variables:


How much air will the tank be able to hold if there is a compressor inside?

-What about moisture inside of the unit?

-How fast will the compressors work?

-What’s new about the valves - “Flow Control”?

-How much is all of this going to be?

-Can I build it as I go?

-Can I use my old elevel?

-What is the draw from the compressor?

Reno answers them ALL!

Reno reflects on SEMA 2016.



Are the two words that come to his mind! I am sure exhausted is in there too.

We start to wrap up and Reno talks about what the future holds for AccuAir and air suspension. Reno, Dustin and the team have no plans of slowing things down. They have big ideas and just the team to make it happen.

Their marketing team, behind Ben Terry continues to push the envelope and bring us the much desired interactive videos, tech, and up to date information.

The future looks bright for this company and I was honored to sit down with Reno at SEMA to get the story. Thank you AccuAir for taking the time to give us the story.


Reno, Dustin, Ben, Derek, Lefty, Taylor - the entire staff, we appreciate your time. Ronnie

Nov 16, 2016
SEMA Recap

My thoughts from SEMA 2016 

The show is brought to you by these RAD ASS sponsors. 

www.brotherstrucks.com Your number one source for 1947-87 Chevy & GMC restoration parts.

www.classicperform.com What's stopping you? Lets make it CPP - Save 10% for usng the "C10 Talk" code - its that easy. Just tell them C10 TALK and you save 10% - Damn Son!

www.frontiershopsupplies.com Check out their bolt bin special - WOW!!

 www.accuair.com The leader in Air management and the creator of the ENDO tank. More then just a tank, ENDO!!

C10 Nation, I hustled around SEMA for 4 days straight and had a blast. I am looking at products and potential builders to interview. It was a success. We met a ton of great people and reconnect with others we haven't seen since last year. 

Enjoy - we did. 

Nov 08, 2016

The Road to SEMA - We Catch up with 10 builders and talk to them about their builds. 

Episode #54 is brought to you by these kick ass sponsors.

www.classicperform.com - What's stopping you?

www.dakotadigital.com - Have you seen their new HDX series gauges? Damn Son!

www.brotherstrucks.com - The #1 source for your 1947-87 Chevy and GMC restoration parts. 

www.azproperformance.com - When you wat to upgrade from stock. 

We catch up with 10 SEMA builders about their builds, the long nights and what it takes to get your ride into SEMA. Some first timers and some repeat builders. 

I really enjoyed this one - I hope you do too, Ronnie


Nov 01, 2016
Ricky Holly Boy

Whats up C10 Nation - this episode is brought to you by - 

www.classicperform.com - What's stopping you?

www.brotherstrucks.com - The #1 source for all of your restoration needs.

www.frontiershopsupplies.com - Order shop supplies like the Pro's.

www.accuair.com - Have you seen the Endo and Endo-VT yet? Damn Son!

Episode #53 Ricky Holly. 

Ricky Holly Boy? Name really? @rickyhollyboy!

Tell us your story? Married, kids??

You grow up in Texas?

Why is Texas mean trucks?

What do you do now? work? best part? hardest part? Funny story with client?

How’d you get into cars/trucks?

How many covers have you had?

Your 71’ C10 - cover build! Truckin!!

Your C/K OBS cover truck!!

Do you do most of the work, or farm it out? Alamo Customs?

Why is your recipe so successful?

Balance - family/work and trucks!!

You like PAINT over PATINA!! thats for sure!! Damn Son  - some amazing paint jobs!!

Tell us about Charlie Brown? Damn Son - such a bad ass build?

How long? Any big struggles?


SEMA 2016?

You like the 67/68 nose thats for sure!!

Magazine coverage? Yet?

Builders you dig?

Bucket list builds

Are you with a club?

Tell us something your friends and family might not know about you?

Oct 25, 2016
Tre5 Customs

Episode #52 with Jeremy Rice, otherwise known as Tre5 Customs is brought to you by these great companies - Support those that support you!






Good times sitting down with Big Jeremy! Even though I knew Jeremy prior to this interview I didn't really know him - and now I do! 

AZ Cards D-line man! Brett Keisel

Did you grow up here?

How did you get into building trucks?

From your own garage to your own shop

Shop atmosphere?

What truck are you most known for?

Blazer in last builders guide!

El Primos Square?

Shane's dad - pops Hi jacked!

Your 49?

Your current SEMA build?

You make a lot of shit look easy?

You are very frank - blunt!

Whats the biggest difference your home garage to big time shop guy?

Battle of builders 2016?

Last year as well

Go kart racing!

Out law Josey wales?

Project manager? Do you wrench as much as you used too?

Tre5 meaning

How many builds going right now - whats too many?

What's your fav youve built

What's your fav someone else has built?

Del moved - thats cool you guys are buds?

Frank - did he follow you?

Auto Rev?

How many hours a week

Do you get exhausted?

SEMA builds last year - most can only do one?

Sold your truck? update?

Thanks for taking time out of your busy schedule Jeremy - the C10 Nation and I appreciate it. See you at SEMA. Bring some dress shoes!!




Oct 12, 2016
Fun N' Done

The fellas from the Squarebody Syndicate get together and Syndicate @rob_c_b and his 1977 C10 Square. 


The trucks are cool, but the people are cooler! C10 Nation!!

Oct 06, 2016
Digital C10

Episode #51 is brought to you by these kick ass sponsors! Support those that support you!

www.classicperform.com - Whats Stopping You?

www.brotherstrucks.com - Your #1 Source for 1947-87 Chevy and GMC restoration parts. 

www.azproperfromance.com - When you want to upgrade from stock!

www.frontiershopsupplies.com - All your shop supplies needs at your fingertip!

Kevin Stickel is the man behind Digital C10. In Episode #51 we get to know about Kevin, the Father, the Husband, the Friend, the Builder, and the Creator. Man he wears a lot of hats - Damn Son!

Kevin Stickel

Tell us about the man behind the Digital art? Married kids etc

Growing up Canada? 80’s culture? How does growing up Canada in perspective to US.

What do you do now?

College years? hanging with DEL??

Canadian IRS - CMB Cash Money Bro’s - Stereo shop!! Cash and Carry??? income tax?

You do all of your own stunts - I heard you rode from one bar to another on top of a Ryder truck?

Digital C10  - how'd that all start?

I like to gauge your artwork popularity to see what is 

trending” in the C10 community!

I love that you can build so many killer trucks - and fuel that creative fire? Do you write all our ideas down and build them or just feel the flow?

Do you get a lot of requests for renderings?

do you have a fav?

How long to create one?

Hardest part?

Limbo - SEMA 2016

1969 with a 72 nose job!

labor of love!

Whats the plan? Langes painting  - Why the re-paint? You weren’t happy?

Del’s then to SEMA?

SEMA house??!!! beers/beers/beers/

Canadian - truck builder = parts etc..

Any bucket list cars or trucks beside this one?

I heard you might want to build an 87 JohnPlayer IROC someday! PIMP status!!

now I know what you did with all that cash and carry money!!

haha - good times!

Thanks Kevin, it is always a pleasure to hang out and drink a beer or two, or three, or maybe even four!! 








Sep 27, 2016